keysight是德 U2062XA 10 MHz to 18 GHz USB Wide Dynamic Range

主要特性与技术指标

• Frequency range of 10 MHz – 18 GHz
• USB connectivity with wide dynamic range of -70 to +26 dBm for small signal measurements
• Fast real time measurement of 50,000 readings/sec
• Variable Sampling Rate 1M samples/sec and Long Memory 1M samples data storage
• Real-time measurement with zero dead time to ensure every single continuous pulse is measured
• Average mode time-selectivity function allows full dynamic range for average and time selectivity average power measurements
• Internal zero and automatic calibration saves time and reduces measurement uncertainty
• A BenchVue software license (BV0007B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences

描述

Accurately measure any modulated signal with the Keysight Technologies, Inc. U/L2050/60 X-Series wide dynamic range power sensors. The USB/LAN connectivity models come with wide dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the internal zero and calibration function. The U/L2050/60 X-Series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform average power measurement and analysis.

Learn more about Keysight LAN and USB Power Sensors

Keysight USB 与局域网功率传感器提供了功率计的峰值功率和平均功率测量功能，且外形紧凑，便于携带。

通过即插即用的 USB 连通性，您可以快速和轻松地对功率传感器进行设置。只需将传感器连接到 PC 上，便可使用软件套件立即执行功率测量。Keysight USB 功率传感器可以让您梦想成真——简单的设置，发挥远超传感器的功能。

您是否正在寻找一款具有局域网连通性的功率传感器，想用它实现卫星系统的远程监测？您可以选择 L20X0XA 局域网功率传感器。它是一款基于局域网/以太网供电（PoE）的传感器，配有热真空选件，且拥有超宽的动态范围。

您想要寻找一款 USB 功率传感器来插入到 PC 中吗？请选择 U20X0XA USB 功率传感器，它拥有实时测量功能和零静寂时间，内置固化软件存储器高达 1MB。

U/L2050/60 X 系列 USB/LAN 宽动态范围峰值和平均功率传感器

• 拥有 -70 至 +26 dBm 的宽动态范围，静寂时间为零，可以测量连续脉冲（低至 100us PRI 或 10 kHz PRF）

U2040 X 系列宽动态范围功率传感器

• 超快的测量速度（50,000 个读数/秒）

U2020 X 系列 USB 峰值功率和平均功率传感器

• 宽广的峰值功率动态范围，并且在缓冲模式下拥有很高的测量速度

U8480 系列 USB 热电偶功率传感器

• 拥有同类产品中较为出色的功率线性度和实时测量不确定度（MU）

U2000 系列 USB 平均功率传感器

• 可测量所有类型信号（不限制带宽）的平均功率

界面直观的功率测量软件

了解与 USB 功率传感器配合使用的 N1918A 功率分析管理软件的更多信息。N1918A 功率分析管理软件。

Keysight BenchVue 软件（2.5 和更高版本）可与 Keysight U2020 X 系列 USB 峰值功率和平均功率传感器搭配使用。BV0000A BenchVue 平台软件。