漆膜击穿强度试验仪绝缘材质电压击穿试验仪

漆膜击穿强度试验仪绝缘材质电压击穿试验仪 主要用于绝缘纸及纸板、层压板、绝缘管、线棒、塑料、薄膜、柔软复合材料、浸渍树脂、橡胶、绝缘胶、陶瓷等绝缘材料的击穿电压、电气强度、耐电压实验，配2套相应电极。另有相关电压击穿试验仪：BDJC-10KV、BDJC-30KV、 BDJC-100KV

产品名称：电压击穿试验仪漆膜击穿强度试验仪绝缘材质电压击穿试验仪 
产品型号：BDJC-50KV
控制方式：微机控制
满足标准：GB1408-2006 绝缘材料电气强度试验方法 
          GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验
          GB/T3333 电缆纸工频电压击穿试验方法
          HG/T 3330绝缘漆漆膜击穿强度测定法
          GB12656 电容器纸工频电压击穿试验方法
          ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.

Product Name: voltage breakdown tester
Item number: BDJC-50KV
Control mode: microcomputer control
Satisfaction criteria: GB1408-2006 insulating materials, electrical strength, test methods
Test for power frequency breakdown strength and voltage strength of GB/T1695-2005 vulcanizate
Test method for power frequency voltage breakdown of GB/T3333 cable paper
Test method for breakdown strength of HG/T 3330 insulating paint film
Test method for power frequency voltage breakdown of GB12656 capacitor paper
Test method for dielectric breakdown voltage and dielectric strength of ASTM D149 solid electrical insulating materials at industrial power frequency

一、漆膜击穿强度试验仪绝缘材质电压击穿试验仪 ，适用范围及功能
电压击穿试验仪, 主要适用于固体绝缘材料（如：塑料、橡胶、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等介质）在工频电压或直流电压下击穿强度和耐电压的测试。
电压击穿试验仪,由电脑控制，通过我公司自主研发的全新智能数字集成电路系统与软件控制系统两部分来完成，使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。
可实时动态绘制试验曲线，显示试验数据，判断准确，并可保存，分析，修改，打印试验数据。

Voltage breakdown tester, scope of application and function
Voltage breakdown testing instrument, mainly applicable to solid insulation materials (such as: plastic, rubber, film, resin, mica, ceramic, glass, insulating paint and other media) in the frequency of the voltage or DC voltage breakdown strength and voltage withstand test.
Voltage breakdown testing instrument, computer control, system two parts to complete control through the new inligent digital integrated circuit and software developed by our company, so that the pressure rate truly uniform and accurate, and can accuray measure the leakage current data.
It can draw the test curve in real time, display the test data, judge accuray, and save, analyze, modify and print the test data.

1、本仪器在试验过程中可对升压击穿过程绘制实时曲线，每次试验的升压曲线都由不同颜色构成，试验结束后可叠加对比材料的试验数据重复性。
2、可以随时调取当前及历史试验数据进行查看，编辑及修改实验结果。
3、试验过程中可以随时修改试验条件及存储路径及自动存储试验结果。
4、试验过程中，可随时通过软件决定本次试验是否有效，方便筛选试验结果。
5、可对软件设置密码，生成密码保护，做到专机专人操作，避免无关人员误操作。
6、 可对试验结果编辑修改后打印，方便操作 更加人性化。
7、可对一组试验中曲线数据的试验结果是否进行人为选定 。
8、本仪器采用先进的无触点原件匀速调压方式，淘汰同类产品中机械传动升压方式。

1. During the test, the instrument can draw a real-time curve for the process of boosting and breakdown. The boosting curves of each test are composed of different colors. After the test, the repeatability of the experimental data of the contrast material can be superposed.
2, you can always transfer the current and historical test data to view, edit and modify the experimental results.
3. The test conditions, storage paths and automatic storage test results can be modified at any time during the test.
4, the test process can be determined at any time through the software test, the test is effective, easy to screen test results.
5, you can set the password for the software, generate password protection, so that the special plane operation, to avoid irrelevant personnel misoperation.
6, the test results can be edited, modified, printed, easy to operate, more humane.
7, can be a set of tests in the curve data test results are artificially selected.
8 、 this instrument adopts advanced contactless original uniform pressure regulation mode, and eliminates the mechanical drive step up mode in similar products.

二、漆膜击穿强度试验仪绝缘材质电压击穿试验仪 ，技术要求：
01、输入电压： 交流 220 V
02、输出电压： 交流 0--50 KV ; 
               直流 0—50 KV
03、电器容量： 3KVA
04、高压分级： 0-10KV，0--50KV，
05、升压速率： 100V/S 200V/S 500 V/S 1000 V/S 2000V/S  5000V/S 等
              （备注：满足标准要求并可以根据用户需求设定不同的升压速率）
06、试验方式：
           直流试验：1、匀速升压  2、梯度升压 3、耐压试验 
           交流试验：1、匀速升压 2、梯度升压 3、耐压试验
07、电压击穿试验仪 ，试验介质：空气，试验油
08、安装灵敏度较高的过电流保护装置保证试样击穿时在0.05S内切断电源。
09、采用智能集成电路进行匀速升压。
10、支持短时间内短路试验要求。
11、电压试验精度： ≤ 1％。
12、试验电压连续可调： 0--50KV。
13、电流可采集到m*。
14、出具*计量单位校准检定证书或出具客户计量单位的证书。
15、电源：220V±10%的单相交流电压和50Hz±1%的频率。
16、电流电压稳定度: 外界电源电压波动10%时

Two 、 voltage breakdown tester, dielectric breakdown strength tester, technical requirements:
01 、 input voltage: AC 220 V
02, output voltage: AC KV 050;
DC 0 - 50 KV
03, electrical capacity: 3KVA
04, high grade: 0-10KV, 050KV,
05, step-up rate: 100V/S, 200V/S, 500, V/S, 1000, V/S, 2000V/S, 5000V/S, etc.
(Note: meet the standard requirements and set up different step-up rate according to the user's demand)
06, test methods:
DC test: 1, uniform step-up 2, gradient step-up 3, withstand voltage test
AC test: 1, uniform step-up 2, gradient step-up 3, pressure test
07 、 voltage breakdown tester, test medium: air, test oil
08 、 installation of high sensitivity over-current protection device to ensure that when the sample breakdown, cut off the power supply in 0.05S.
09, the inligent integrated circuit is used to increase the speed at a constant speed.
10. Support short circuit test in short time.
11, voltage test accuracy: less than 1%.
12, the test voltage can be adjusted continuously: 050KV.
13 、 current can be collected to mA level.
14, issued by the national level measurement unit calibration certificate or issued by the customer designated measurement unit certificate.
15, power supply: 220V + 10% single-phase AC voltage and 50Hz + 1% frequency.
16, current and voltage stability: outside power supply voltage fluctuation 10%

三、漆膜击穿强度试验仪绝缘材质电压击穿试验仪 安全保护

电压击穿试试验仪器介电击穿强度试验仪，电路保护控制：
（1）超压保护 （2）过流保护 （3）短路保护（4）漏电保护 （5）软件误操作保护

   高压输入回路断电保护控制：

   （1）总电源开关        （2）调压器复位开关 （3）高压断电开关
        （4）试验箱门安全开关 （5）高压回路开关    （6）漏电保护开关

Three, safety protection
Voltage breakdown test instrument dielectric breakdown strength tester circuit protection control:
(1) over voltage protection (2) over-current protection (3) short circuit protection (4) leakage protection (5) software misoperation protection;
High voltage input circuit power-off protection control:
(1) total power switch (2), voltage regulator reset switch (3) high voltage power off switch
(4) test box door safety switch (5) high voltage circuit switch (6) leakage protection switch;

四、介电击穿强度试验仪主要配置
标准配置
序号 名称 配置 备注 
01 试验主机 一台   
02 控制装置 一套   
03 试验电极 二套（国标1408.1）   
04 试验油箱 二只   
05 放电系统 一套   
06 控制系统 一套   
07 数据采集系统 一套   
08 试验软件 一套 光盘 
09 计算机 一套 品牌 
10 喷墨打印机 一台 品牌 
11 产品使用说明书 一份   
12 计量证书 一份   
13 产品合格证 一份 

Four 、 dielectric breakdown strength tester is mainly configured
Standard configuration
Serial number name configuration note
01 test host one
02 control device set
03 test electrode two sets (GB 1408.1)
04 test tank two
05 a set of discharge systems
06 control system set
07, a data acquisition system
08 test software, a CD-ROM
09 computer brand
10 inkjet printer a brand
11 a copy of the product instruction manual
12 a certificate of measurement
13 product qualification certificate 

五、电压击穿试验仪介电击穿强度试验仪,设备安全说明：

1、设备要安装单独的保护地线。接保护地线，主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

2、该试验设备的电路设有多项保护措施，主要有：过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

3、接地要求： 仪器需要单独接地，接地附合国家标准要求，金属棒深埋地下至少要1.5米以下。

4、该试验设备的电路设有多项保护措施，主要有：过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

Five 、 voltage breakdown tester, dielectric breakdown strength tester, equipment safety instructions:
1. The equipment shall be provided with a single protective earth wire. The protective earth wire is mainly used to reduce the strong electromagnetic interference produced by the breakdown of the sample. Computer control can also be avoided.
2 、 the circuit of the test equipment has a number of protective measures, including over-current protection, voltage loss protection, leakage protection, short-circuit protection, DC test, discharge alarm, etc..
3 、 grounding requirements: the instrument needs to be grounded separay, and the ground meets the requirements of the national standard. The metal bar is buried at least 1.5 meters deep.
4 、 the circuit of the test equipment has a number of protective measures, including over-current protection, voltage loss protection, leakage protection, short-circuit protection, DC test, discharge alarm, etc..

 
六、电压击穿试验仪常规型号为：
                  
 
                  BDJC-10KV 
                  BDJC-20KV 
                  BDJC-30KV 
                  BDJC-50KV 
                  BDJC-100KV

Six 、 voltage breakdown tester conventional model for:
BDJC-10KV
BDJC-20KV
BDJC-30KV
BDJC-50KV
BDJC-100KV

北广公司其它绝缘材料检测仪器:

BDJC-0-100KV 介电击穿试验仪

BDJC系列绝缘材料工频率介电击穿试验仪

BDJC系列电压介电强度试验仪器

BDJC系列 电压击穿试验仪

BDJC系列绝缘漆漆膜击穿强度试验仪

BDJC电容器纸工频电压击穿试验仪

EST-121 体积表面电阻率测定仪

GDAT-A介质损耗测试仪/介电常数测试仪

GDAT-C新型介电常数介质损耗测试仪

BDH 耐漏电起痕试验仪

BDH-B耐电弧试验仪

Canton company other insulating materials testing instruments:
BDJC-0-100KV dielectric breakdown tester
Dielectric breakdown tester for BDJC series insulation materials at power frequency
BDJC series voltage dielectric strength test instrument
BDJC series voltage breakdown tester
Tester for breakdown strength of BDJC series insulating paint film
BDJC capacitor paper power frequency voltage breakdown tester
EST-121 volume surface resistivity meter
GDAT-A dielectric loss tester / dielectric constant tester
GDAT-C new dielectric constant dielectric loss tester
BDH creepage proof tester
BDH-B arc resistance tester

：  

Contact number: :